Complete bespoke replacement Matris damper and spring assembly for Marzocchi forks. This fork upgrade completely replaces your budget Kaifa fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your V7. Fully adjustable damping and preload allows you to get your bike handling as it should.

Combine a pair of Hagon Nitro R rear shocks to transform the handling of your V7.

This kit is not suitable for Kaifa

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Left hand headlight bracket, supplied in a black base coat for final finishing

See SUA17700 for mounting rubbers (two required per side)

 Sorry, this part is no longer available.

14496251-z 14496251 GU14496251 14 49 62 51
 1449 6251 1449.6251 14.49.62.51

Top fork bush

Also known as Guzzi ref. 8163093. No longer available from Guzzi

 This part is available by special order, request a quote

 03530528 GU03530528 03 53 05 28
 0353 0528 0353.0528 03.53.05.28

Single reinforced fork spring

For all models with 32mm forks. Discontinued - see SUA19601 for replacement progressive fork springs

 Sorry, this part is no longer available.

19526600-z 19526600 GU19526600 19 52 66 00
 1952 6600 1952.6600 19.52.66.00

Headlamp mounting rubber, fits round fork stanchion

 Sorry, this part is no longer available.

 28492700 GU28492700 28 49 27 00
 2849 2700 2849.2700 28.49.27.00

Dust cover for fork slider

 Sorry, this part is no longer available.

31524550-z 31524550 GU31524550 31 52 45 50
 3152 4550 3152.4550 31.52.45.50

Upper fork bush

Split fork bush, also known as Guzzi ref. 30525861. No longer available.

 Sorry, this part is no longer available.

 599629 MG599629

These clever spacers allow the fitting of the taper roller head bearings which are standard on later small twins in place of the often damaged and fiddly OE ball bearing races.The taper roller bearings last much longer and are easily replaced unlike the ball bearing races

This part consists of 2 x taper roller adapters and a pair of taper roller bearings, depending on the condition of your stem it may be necessary to shim the taper roller bearings. You may find that extra headlamp rubbers SUA39701 are required to take up the extra distance between the top and bottom yoke on the fork stanchions. See The Shed for instructions.

 Sorry, this part is no longer available.

 39515000 GU39515000 39 51 50 00
 3951 5000 3951.5000 39.51.50.00

Fork bush

 This part is available by special order, request a quote

 12525800 GU12525800 12 52 58 00
 1252 5800 1252.5800 12.52.58.00

Dust cover for fork leg, seals against stanchion to protect fork seal

 Availability varies on this part, check availability

14524500-z 14524500 GU14524500 14 52 45 00
 1452 4500 1452.4500 14.52.45.00